Double Pedal Drums

TAMA HPDS1TW [Dyna-Sync Twin Pedal]. TAMA Dyna-Sync Drum Pedal. HPDS1TW (Dynasync Twin Pedal). A twin pedal that uses a direct drive system that uses a metal arm to connect the cam and footboard on both the left and right sides. By setting the contact point of the direct link that connects the cam and footboard to the optimum position/angle, we pursued the perfect balance of power and speed as well as a natural feel. In addition, by sliding the upper arm of the cam back and forth, the turning radius of the cam can be adjusted steplessly. By changing to a variety of stepping comfort according to your preference, it brings a sense of unity that fits all play styles. A dedicated hard case is included. The direct drive, which uses a metal arm to connect the cam and footboard, eliminates play in the action during playing, resulting in an extremely light feel and quick footboard return. On the other hand, the unique feeling that changes depending on the angle of stepping is where the tastes of players are divided. With the Dyna-Sync pedal, by setting the contact point of the direct link that connects the cam and the footboard to the optimum position/angle, regardless of the angle of depression, you can achieve the perfect combination of power and speed as well as a natural feel. In order to convert the force of stepping on the footboard into rotational motion of the cam without waste, a rotating shaft with bearings is attached to both ends of the joint part of the arm that connects the cam and footboard. In addition, by holding them with the same force from the left and right with two arms, energy loss at the connecting part is prevented to the utmost limit, realizing amazing reaction speed and power. By sliding the upper arm of the cam back and forth, the turning radius of the cam can be adjusted steplessly. By extending the arm and increasing the radius of rotation (moving in the direction of L: Large), the angle of the footboard during play and the force required to step on the pedal will change more slowly, giving you a fine touch similar to that of a chain drive pedal. It realizes high operability that can be expressed. Conversely, if the arm is shortened to make it smaller (move to S:Small), the change in the angle of the footboard and the force required to step on will be greater, resulting in an action that enhances the direct drive feel and provides a solid stepping feel. It will be possible. Even though it is a direct drive action, it can be changed to a variety of stepping comfort according to your taste, bringing a sense of unity that fits any play style. An important feature for customizing drummers to their individual tastes is the ability to adjust the footboard angle independently of the beater angle. The Dyna-Sync pedal is equipped with a new and unique angle adjustment function that has never existed before. At the tip of the footboard, there is a clamp that connects the linkage that extends from the cam, and by adjusting the bolt provided there with the tuning key, you can change the angle of the entire footboard and firmly fix it. The beater angle can be adjusted steplessly in conjunction with the footboard. Loosen the square head bolt on the side of the rocker cam and adjust using the scale on the black cap as a guide. The Dyna-Sync pedal uses an adjustment mechanism that changes the angle of the direct link in conjunction with the beater angle adjustment in order to maintain its characteristic pedal feel regardless of the beater angle. Therefore, adjusting the angle of the beater will also change the angle of the footboard, so adjust the angle of the footboard only by loosening the bolt on the clamp at the tip of the footboard. When adjusting the angle of the left beater of the twin pedal, use the rocker cam instead of the beater holder. Sync-Coil is a TAMA original mechanism that assists the return of the footboard by making the coil touch the back of the footboard just before the beater hits the head. Adopts a spring that is 1.5 times stronger than the Cobra Coil of Cobra pedals, so you can get a stronger effect. A traditional bale beater with black felt and a slight taper. Realizes a natural feel when playing and a clear and dynamic bass drum sound. Adopts a spring (HP900-7H) with stronger tension than the one used in the IRON COBRA 900/600 pedals. Mechanism for maximizing the effect of the spring. By rotating the shaft that fixes the lower end of the spring, the spring always expands and contracts vertically without being distorted even during violent movements. This converts the elastic energy stored in the spring into energy that moves the pedal without loss. In addition, by reducing the friction on the connecting part with the spring, we have realized the ideal pedal work of light depression and quick return. Speedo-ring & Quick Hook. High-precision ball bearings installed in the connection between the spring and the shaft. With this bearing, the elastic energy generated in the spring by stepping on the footboard is converted into rotational energy of the cam without waste. In addition, since the movement of the spring is precisely followed, the movement of the foot and the footboard can be linked smoothly. TAMA’s original clamp that securely holds bass drum hoops of various thicknesses. By attaching rubber to the tip that secures the bass drum hoop, the grip is enhanced, and it exhibits strong fixing power while suppressing damage to the hoop. In addition, since the tip moves in three dimensions, even if the front of the bass drum is set up to be extremely raised, the tip fits according to the angle and stabilizes the pedal. The footboard for Dyna-Sync pedals has a flat surface over the entire surface, which is designed to accommodate a variety of pedal playing styles. In addition, while adopting the standard length of the footboard itself, by setting the starting point of the footboard to the rear until a point where “lightness” that does not feel uncomfortable can be obtained, it is possible to maintain a natural action while lightly stepping. Like a long footboard, by stepping on the heel side where there is less vertical movement, you can increase your ability to respond to fast passages. By holding the bearings on both ends of the hinge shaft in a sandwiched manner, the force applied to the bearings when the pedal is stepped on is dispersed. It is possible to reduce the load on the hinge shaft itself, realizing higher precision rotation and smooth operability along with high durability. The hinge, which is the fulcrum of the footboard, uses an Oiles bearing made of bell brass mesh coated with Teflon resin. It shuts out unpleasant footboard lateral shake and provides smooth pedal work. We will carefully deliver using the packing material. Due to the effects of infectious diseases, cheap flights such as SAL have been suspended all over the world. We accept return the only case of unopened item package. ¦¦¦International Buyers Please Note ¦¦¦. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. This item is in the category “Musical Instruments & Gear\Percussion\Parts\Pedals”. The seller is “bigupspirit3″ and is located in this country: JP. This item can be shipped worldwide.

• Country/Region of Manufacture: Japan
• Brand: TAMA
• Type: Double Bass Drum Pedal
• Item Height: 3in.
• For Instrument: Bass Drum
• Model: HPDS1TW
• MPN: HPDS1TW
• Item Length: 3in.
• Item Width: 3in.
• Item Weight: 14.67lbs.