Drum Workshop DWCP3002 Double Pedal with New driveshaft assembly [Excellent]. Replacement driveshaft from DW9000 pedals, less play and more power for your double pedal playing.
Tag Archive for assembly
DW 3002 Double Pedal with New driveshaft assembly Excellent
Drum Workshop DWCP3002 Double Pedal with New driveshaft assembly [Excellent]. Replacement driveshaft from DW9000 pedals, less play and more power for your double pedal playing.
Comments Off
assembly, double, driveshaft, excellent, pedal
DW Machined Direct Drive Double Pedal Blue Main Assembly only EX COND
It is the main part of the assembly, the remote pedal and linkage are not included. The pedal is in excellent working condition. This item is in the category “Musical Instruments & Gear\Percussion\Parts\Pedals”. The seller is “sturk” and is located in this country: US. This item can be shipped to United States.
- UPC: 647139580067
Universal 7 Brake Booster Master Cylinder Frame Mount Pedal Assembly Disc Drum
Universal 7 Brake Booster Master Cylinder Frame Mount Pedal Assembly Disc Drum. This is for a Brand New. Universal Grame Mount power brake booster assembly with Disc/Drum residual valves. This is an under floor frame mount pedal; which includes brackets and pedal assembly for mounting a power booster and master cylinder to your frame. Also included is a high quality 7 dual booster and master cylinder combo. This is not a direct fit pedal, so some modification may be needed depending on your application; it is a nice starting point for a lot of these trucks that don’t have a direct fit option out there. The dual diaphragm booster gives you 27% better stopping power over the single booster, making it better for cars that will have a heavier load. This setup is ready for all disc/drum applications. The master cylinder is a Corvette style master cylinder with a 1 bore. Additionally this includes a pair of residual brake pressure valves. One is the 2 Pound Pressure Valve (Blue) for Front Disc Brakes and one is the 10 pound pressure valve (red) for rear drum brakes. These valves are used with a disc brake application where the master cylinder is located under the floor. When the master cylinder is under the floor, it is usually lower than the calipers. Gravity and vibration can cause brake fluid to leak back to the master cylinder away from the calipers, causing a loss of brake pressure. These valves will act as a one way check valve that prevents this type of bleed-back. Without it, there is a good chance that the brakes will drag or give out completely! These valves are an inexpensive and necessary addition to your brake system. This is for TWO valves, one for the front disc brakes and one for the rear drum brakes. JTGH002 w/ 7 Dual Booster & Master Cylinder + Red Valve + Blue Valve. Please wait for us to send you a combined invoice before paying. We are Gearhead Enterprises – a national street rod parts supply company. Parts are added to our store weekly so check often for the latest deals! Plus, we have access to thousands of parts that are not listed. We get hundreds of emails daily so at times it may take us up to 72 hours to respond to your emails. Get images that make Supersized seem small. Showcase your items with Auctiva’s. The item “Universal 7 Brake Booster Master Cylinder Frame Mount Pedal Assembly Disc Drum” is in sale since Wednesday, July 8, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Other Brake Parts”. The seller is “rodpartsdealer” and is located in Hudson, Iowa. This item can be shipped to United States, Canada, United Kingdom, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
- Manufacturer Part Number: JTGH002 w/ 7″ Dual Booster & Master Cylinder + Red
- Brand: Gearhead
- Vintage Car Part: Yes
53-56 Ford Truck 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Valve
53-56 Ford Truck 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Valve. This is for a Brand New. This includes bracket and pedal assembly designed for the 1953 1954 1955 1956 Ford Truck. The pedal is zinc plated for extra protection. This kit includes a bracket and pedal assembly designed for the 53-56 Truck. Also included is a high quality 7 dual booster and master cylinder combo. The dual diaphragm booster gives you 27% better stopping power over the single booster, making it better for cars that will have a heavier load. This setup is ready for all disc/drum applications. The master cylinder is a Corvette style master cylinder with a 1 bore. Additionally this includes a pair of residual brake pressure valves. One is the 2 Pound Pressure Valve (Blue) for Front Disc Brakes and one is the 10 pound pressure valve (red) for rear drum brakes. These valves are used with a disc brake application where the master cylinder is located under the floor. When the master cylinder is under the floor, it is usually lower than the calipers. Gravity and vibration can cause brake fluid to leak back to the master cylinder away from the calipers, causing a loss of brake pressure. These valves will act as a one way check valve that prevents this type of bleed-back. Without it, there is a good chance that the brakes will drag or give out completely! These valves are an inexpensive and necessary addition to your brake system. This is for TWO valves, one for the front disc brakes and one for the rear drum brakes. 1953-56 Ford Truck Pedal w/ 7 Dual Booster & Master Cylinder + Red Valve + Blue Valve. Please wait for us to send you a combined invoice before paying. We are Gearhead Enterprises – a national street rod parts supply company. Parts are added to our store weekly so check often for the latest deals! Plus, we have access to thousands of parts that are not listed. We get hundreds of emails daily so at times it may take us up to 72 hours to respond to your emails. Get images that make Supersized seem small. Showcase your items with Auctiva’s. The item “53-56 Ford Truck 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Valve” is in sale since Tuesday, July 7, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Other Brake Parts”. The seller is “rodpartsdealer” and is located in Hudson, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
- Manufacturer Part Number: 1953-56 Ford Truck Pedal w/ 7″ Dual Booster & Mas
- Brand: Gearhead
- Vintage Car Part: Yes
Universal 7 Brake Booster Master Cylinder Frame Mount Pedal Assembly Drum Drum
Universal 7 Brake Booster Master Cylinder Frame Mount Pedal Assembly Drum Drum. This is for a Brand New. Universal Grame Mount power brake booster assembly with Drum/Drum residual valves. This is an under floor frame mount pedal; which includes brackets and pedal assembly for mounting a power booster and master cylinder to your frame. Also included is a high quality 7 dual booster and master cylinder combo. This is not a direct fit pedal, so some modification may be needed depending on your application; it is a nice starting point for a lot of these trucks that don’t have a direct fit option out there. The dual diaphragm booster gives you 27% better stopping power over the single booster, making it better for cars that will have a heavier load. This setup is ready for all drum/drum applications. The master cylinder is a Corvette style master cylinder with a 1 bore. Additionally this includes a pair of residual brake pressure valves. Both are the 10 pound pressure valve (red) for front and rear drum brakes. These valves are used with any brake application where the master cylinder is located under the floor. When the master cylinder is under the floor, it is usually lower than the calipers. Gravity and vibration can cause brake fluid to leak back to the master cylinder away from the calipers, causing a loss of brake pressure. These valves will act as a one way check valve that prevents this type of bleed-back. Without it, there is a good chance that the brakes will drag or give out completely! These valves are an inexpensive and necessary addition to your brake system. This is for TWO valves, one for the front dirum brakes and one for the rear drum brakes. JTGH002 w/ 7 Dual Booster & Master Cylinder + (2) Red Valves. Please wait for us to send you a combined invoice before paying. We are Gearhead Enterprises – a national street rod parts supply company. Parts are added to our store weekly so check often for the latest deals! Plus, we have access to thousands of parts that are not listed. We get hundreds of emails daily so at times it may take us up to 72 hours to respond to your emails. Auctiva offers Free Image Hosting and Editing. Auctiva gets you noticed! The item “Universal 7 Brake Booster Master Cylinder Frame Mount Pedal Assembly Drum Drum” is in sale since Wednesday, July 8, 2020. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Brakes”. The seller is “rodpartsdealer” and is located in Hudson, Iowa. This item can be shipped to United States, Canada, United Kingdom, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
- Brand: Gearhead
- Manufacturer Part Number: JTGH002 w/ 7″ Dual Booster & Master Cylinder + Red
- Vintage Car Part: Yes
1935-40 Ford Dual 7 Power Brake Booster Master Cylinder Pedal Bracket Assembly
This is a new heavy duty DUAL power brake booster assembly for 1935-40 Ford cars. Part # F3540 DUAL and R8501. This is a direct bolt on kit for listed applications and is compatible with disc/disc or disc/drum setups. 7 zinc plated DUAL diaphragm brake booster. 1″ bore “Corvette style master cylinder. Zinc plated pedal assembly. Polished aluminum brake pad with rubber inserts. Note: Brake booster pictured is single diaphragm… You will receive dual diaphragm. For vehicles with automatic transmission. No provision for clutch. Also available with 7 single diaphragm booster. Note: Safety comes first. Any brake service should only be performed by persons experienced in the installation and proper operation of brake systems. It is the responsibility of the person installing any brake component or kit to determine the suitability for the particular application. After installation and prior to operating vehicle, brake function should be tested under controlled conditions. 1935 1936 1937 1938 1939 1940 Ford. New items are being added daily. The item “1935-40 Ford Dual 7 Power Brake Booster Master Cylinder Pedal Bracket Assembly” is in sale since Saturday, May 11, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Master Cylinders & Parts”. The seller is “autoaccessories4u4less” and is located in La Porte City, Iowa. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
- Brand: Gearhead Enteprises
- Manufacturer Part Number: F3540 + R8501 dual
- Suitable for: Disc
1937-48 Chevy Car 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Kit
1937-48 Chevy Car 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Kit. BRACKET IS BLACK NOW NOT ZINC AS PITURED. This is for a Brand New. This includes bracket and pedal assembly designed for the 1937 1938 1939 1940 1941 1942 1946 1947 1948 Chevy Car. The pedal is zinc plated for extra protection. This kit includes a bracket and pedal assembly designed for the 37-48 Car. Also included is a high quality 7 dual booster and master cylinder combo. The dual diaphragm booster gives you 27% better stopping power over the single booster, making it better for cars that will have a heavier load. This setup is ready for all disc/drum applications. The master cylinder is a Corvette style master cylinder with a 1 bore. Additionally you’ll receive a Zinc DISC/DRUM proportioning valve kit (self adjusting valve, lines and bracket to mount kit to the side of the master cylinder). The proportioning valve has a zinc finish. This valve is also called a combination valve, as it performs all of the necessary valving functions with a disc brake conversion. These functions include the following. Proportioning: As more force is applied to the brakes and the car begins to lean forward, less braking force is needed in the rear. This valve decreases the pressure to the rear, preventing lock up. Metering: Metering is used in the front disk brake portion in the disc/drum system to delay application of the front discs allowing the slower reacting drum brakes to catch up. This provides rear stability on wet surfaces and helps prevent front pad wear. There is no metering function with the disc/disc setup. Residual Pressure: Drum Brakes require residual pressure of 10 lbs. To be held in the line. This pressure keeps the brake shoes close to the drums giving you a more firm pedal feel. The disc/disc setup does not require this pressure. System Failure Switch: This valve has a system failure switch that will alert you when half of your braking system is not working properly. As with any brake job, professional installation is recommended, as it is vital that everything is installed correctly prior to use. Please wait for us to send you a combined invoice before paying. We are Gearhead Enterprises – a national street rod parts supply company. Parts are added to our store weekly so check often for the latest deals! Plus, we have access to thousands of parts that are not listed. We get hundreds of emails daily so at times it may take us up to 72 hours to respond to your emails. Get images that make Supersized seem small. Showcase your items with Auctiva’s. Attention Sellers – Get Templates Image Hosting, Scheduling at Auctiva. The item “1937-48 Chevy Car 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Kit” is in sale since Wednesday, July 8, 2020. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Brakes”. The seller is “rodpartsdealer” and is located in Hudson, Iowa. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
- Manufacturer Part Number: 1937-1948 Chevy Pedal w/ 7″ Dual Booster + 3510-2
- Brand: Gearhead
47-54 Chevy Truck 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Kit
47-54 Chevy Truck 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Kit. This is for a Brand New. This includes bracket and pedal assembly designed for the 1947 1948 1949 1950 1951 1952 1953 1954 Chevy Truck. The pedal is zinc plated for extra protection. This kit includes a bracket and pedal assembly designed for the 47-54 Truck. Also included is a high quality 7 dual booster and master cylinder combo. The dual diaphragm booster gives you 27% better stopping power over the single booster, making it better for cars that will have a heavier load. This setup is ready for all disc/drum applications. The master cylinder is a Corvette style master cylinder with a 1 bore. Additionally you’ll receive a Zinc DISC/DRUM proportioning valve kit (self adjusting valve, lines and bracket to mount kit to the side of the master cylinder). The proportioning valve has a zinc finish. This valve is also called a combination valve, as it performs all of the necessary valving functions with a disc brake conversion. These functions include the following. Proportioning: As more force is applied to the brakes and the car begins to lean forward, less braking force is needed in the rear. This valve decreases the pressure to the rear, preventing lock up. Metering: Metering is used in the front disk brake portion in the disc/drum system to delay application of the front discs allowing the slower reacting drum brakes to catch up. This provides rear stability on wet surfaces and helps prevent front pad wear. There is no metering function with the disc/disc setup. Residual Pressure: Drum Brakes require residual pressure of 10 lbs. To be held in the line. This pressure keeps the brake shoes close to the drums giving you a more firm pedal feel. The disc/disc setup does not require this pressure. System Failure Switch: This valve has a system failure switch that will alert you when half of your braking system is not working properly. As with any brake job, professional installation is recommended, as it is vital that everything is installed correctly prior to use. 1947-54 Chevy Truck Pedal w/ 7 Dual Booster & Master Cylinder + PV2 Side Kit. Please wait for us to send you a combined invoice before paying. We are Gearhead Enterprises – a national street rod parts supply company. Parts are added to our store weekly so check often for the latest deals! Plus, we have access to thousands of parts that are not listed. We get hundreds of emails daily so at times it may take us up to 72 hours to respond to your emails. Get Supersized Images & Free Image Hosting. Create your brand with Auctiva’s. Attention Sellers – Get Templates Image Hosting, Scheduling at Auctiva. The item “47-54 Chevy Truck 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Kit” is in sale since Tuesday, July 7, 2020. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Brakes”. The seller is “rodpartsdealer” and is located in Hudson, Iowa. This item can be shipped to United States, Canada, United Kingdom, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
- Manufacturer Part Number: 1947-54 Chevy Truck Pedal w/ 7″ Dual Booster & Mas
- Brand: Gearhead
53-56 Ford Truck 7 Brake Booster Master Cylinder Pedal Assembly Drum Drum Valve
53-56 Ford Truck 7 Brake Booster Master Cylinder Pedal Assembly Drum Drum Valve. This is for a Brand New. This includes bracket and pedal assembly designed for the 1953 1954 1955 1956 Ford Truck. The pedal is zinc plated for extra protection. This kit includes a bracket and pedal assembly designed for the 53-56 Truck. Also included is a high quality 7 dual booster and master cylinder combo. The dual diaphragm booster gives you 27% better stopping power over the single booster, making it better for cars that will have a heavier load. This setup is ready for all drum/drum applications. The master cylinder is a Corvette style master cylinder with a 1 bore. Additionally this includes a pair of residual brake pressure valves. Both are the 10 pound pressure valve (red) for front and rear drum brakes. These valves are used with any brake application where the master cylinder is located under the floor. When the master cylinder is under the floor, it is usually lower than the calipers. Gravity and vibration can cause brake fluid to leak back to the master cylinder away from the calipers, causing a loss of brake pressure. These valves will act as a one way check valve that prevents this type of bleed-back. Without it, there is a good chance that the brakes will drag or give out completely! These valves are an inexpensive and necessary addition to your brake system. This is for TWO valves, one for the front drum brakes and one for the rear drum brakes. 1953-56 Ford Truck Pedal w/ 7 Dual Booster & Master Cylinder + (2) Red Valves. Please wait for us to send you a combined invoice before paying. We are Gearhead Enterprises – a national street rod parts supply company. Parts are added to our store weekly so check often for the latest deals! Plus, we have access to thousands of parts that are not listed. We get hundreds of emails daily so at times it may take us up to 72 hours to respond to your emails. Get Supersized Images & Free Image Hosting. Create your brand with Auctiva’s. Attention Sellers – Get Templates Image Hosting, Scheduling at Auctiva. The item “53-56 Ford Truck 7 Brake Booster Master Cylinder Pedal Assembly Drum Drum Valve” is in sale since Tuesday, July 7, 2020. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Brakes”. The seller is “rodpartsdealer” and is located in Hudson, Iowa. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
- Manufacturer Part Number: 1953-56 Ford Truck Pedal w/ 7″ Dual Booster & Mas
- Brand: Gearhead
55-59 Chevy Truck 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Kit
55-59 Chevy Truck 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Kit. It just depends what inventory we have in stock at the time of the order. This is for a Brand New. This includes bracket and pedal assembly designed for the 1955 1956 1957 1958 1959 Chevy Truck. I believe it also works for GMC trucks of the same years. The pedal is zinc plated for extra protection. This kit includes a bracket and pedal assembly designed for the 55-59 Truck. Also included is a high quality 7 dual booster and master cylinder combo. The dual diaphragm booster gives you 27% better stopping power over the single booster, making it better for cars that will have a heavier load. This setup is ready for all disc/drum applications. The master cylinder is a Corvette style master cylinder with a 1 bore. Additionally you’ll receive a Zinc DISC/DRUM proportioning valve kit (self adjusting valve, lines and bracket to mount kit to the side of the master cylinder). The proportioning valve has a zinc finish. This valve is also called a combination valve, as it performs all of the necessary valving functions with a disc brake conversion. These functions include the following. Proportioning: As more force is applied to the brakes and the car begins to lean forward, less braking force is needed in the rear. This valve decreases the pressure to the rear, preventing lock up. Metering: Metering is used in the front disk brake portion in the disc/drum system to delay application of the front discs allowing the slower reacting drum brakes to catch up. This provides rear stability on wet surfaces and helps prevent front pad wear. There is no metering function with the disc/disc setup. Residual Pressure: Drum Brakes require residual pressure of 10 lbs. To be held in the line. This pressure keeps the brake shoes close to the drums giving you a more firm pedal feel. The disc/disc setup does not require this pressure. System Failure Switch: This valve has a system failure switch that will alert you when half of your braking system is not working properly. As with any brake job, professional installation is recommended, as it is vital that everything is installed correctly prior to use. 1955-59 Chevy Truck Pedal w/ 7 Dual Booster & Master Cylinder + PV2 Side Kit. Please wait for us to send you a combined invoice before paying. We are Gearhead Enterprises – a national street rod parts supply company. Parts are added to our store weekly so check often for the latest deals! Plus, we have access to thousands of parts that are not listed. We get hundreds of emails daily so at times it may take us up to 72 hours to respond to your emails. Get images that make Supersized seem small. Tailor your auctions with Auctiva’s. The item “55-59 Chevy Truck 7 Brake Booster Master Cylinder Pedal Assembly Disc Drum Kit” is in sale since Tuesday, July 7, 2020. This item is in the category “eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Brakes”. The seller is “rodpartsdealer” and is located in Hudson, Iowa. This item can be shipped to United States, Canada, United Kingdom, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
- Manufacturer Part Number: 1955-59 Chevy Truck Pedal w/ 7″ Dual Booster & Mas
- Brand: Gearhead