The Dyna-Sync pedal pursues the perfect balance of “power and speed” as well as “natural feeling” by setting the contact point of the direct link that connects the cam and the footboard to the optimal position/angle. The rotation radius of the cam can be adjusted “steplessly” by sliding the upper arm of the cam back and forth. By changing the feel to a variety of different footsteps according to your preferences, it brings a sense of unity that fits any playing style. Drum pedal that uses a “direct drive” method that uses a metal arm to connect the cam and footboard. Comes with a dedicated hard case. The direct drive, which uses a metal arm to connect the cam and footboard, eliminates the “play” of the action during playing, achieving a very light footstep feel and quick footboard return. On the other hand, the unique feeling that changes depending on the angle of the footstep is where players have different preferences. Dyna-Sync pedals pursue the perfect balance of “power and speed” as well as “natural feeling” by setting the contact point of the direct link that connects the cam and footboard to the optimal position/angle regardless of the angle of the footboard. In order to convert the force of stepping on the footboard into the rotational motion of the cam without waste, a rotating shaft with a bearing is installed on both ends of the joint of the arm that connects the cam and the footboard. In addition, by holding them with the same force from the left and right with two arms, energy loss at the connection is prevented to the utmost extent, achieving incredible reaction speed and power. The cam’s rotation radius can be adjusted “infinitely” by sliding the upper arm of the cam back and forth. By extending the arm and increasing the rotation radius (moving in the L:Large direction), the change in the angle of the footboard and the force required for stepping during play becomes gradual, achieving high operability that can express a fine touch like a chain drive pedal. Conversely, if you shorten the arm and make it smaller (moving in the S: Small direction), the change in footboard angle and the force required to step on it will be greater, resulting in an action that enhances the direct drive feeling, and you will be able to get a solid feeling of stepping on it. Although it is a direct drive action, by changing the feel of the footboard to suit your preferences, you can create a sense of unity that fits any playing style. An important feature for customizing to each drummer’s personal preferences is the footboard angle adjustment independent of the beater angle. The Dyna-Sync pedal is equipped with a new and unique angle adjustment function that has never been seen before. At the tip of the footboard, there is a clamp that connects the linkage extending from the cam, and by adjusting the bolt installed there with a tuning key, you can change the angle of the entire footboard and firmly fix it. The Sync-Coil is a TAMA original mechanism that assists the return of the footboard by touching the back of the footboard with a coil just before the beater hits the head. It uses a spring that is 1.5 times stronger than the Cobra Coil of the Cobra pedal, resulting in a more powerful effect. A traditional bale-shaped beater featuring black felt and a slight taper. It provides a natural feeling when playing and a clear, dynamic bass drum sound. The bearings on both ends of the hinge shaft are held in place by sandwiching them from above and below, dispersing the force applied to the bearings when the pedal is pressed. This reduces the load on the hinge shaft itself, achieving higher precision rotation, smoother operability, and high durability. A mechanism to maximize the effect of the spring. The axis that fixes the lower end of the spring rotates, so the spring always expands and contracts vertically without distortion even with intense movement. This converts the elastic energy stored in the spring into energy that moves the pedal without loss. In addition, by reducing the friction on the connection part with the spring, we have achieved ideal pedal work that is light to press and quick to return. TAMA’s original clamp that securely holds bass drum hoops of various thicknesses. The rubber on the tip that secures the bass drum hoop increases the grip and provides strong fixing power while minimizing damage to the hoop. In addition, the tip is designed to move in three dimensions, so even if the front of the bass drum is extremely raised, the tip will fit according to the angle and stabilize the pedal. The hinge that supports the footboard uses an “Oiles” bearing made of bell brass mesh coated with Teflon resin. It shuts out unpleasant lateral movement of the footboard and provides smooth pedal work. We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior. About Importer’s Obligation. Please note the voltage, etc. Corresponding to your country.
